Home
Business
The design and processing of products
Mold design
Mold processing
Injection processing
Plastic ultrasonic
Laser carving
Products
Socket
Car parts
Camera
Medical plastic bottle
Electronic scale shell
Storage Box
Disposable nebulization mask
News
latest events
Latest News
About
Cooperation
Contact
English
020-34875708
Latest Information
Latest Activities
Cycle of gas-assisted injection molding
2023-02-20 18:07
The cycle of gas-assisted injection can be divided into four stages: plastic injection period, inflation period, gas holding period and demoulding period.
Classification and process of gas-assisted injection molding
According to the characteristics of gas-assisted injection molding, gas-assisted injection molding can be realized by adding a set of gas supply device to the existing injection machine. According to the use abroad, gas-assisted injection molding can be divided into standard molding method, melt reflow molding method and movable core withdrawal method.
Principle of gas-assisted injection molding
The principle of gas-assisted injection molding is relatively simple. In the process of injection filling, the gas with lower pressure than the injection pressure is injected into the melt, usually several to dozens of megapascals, and the pressure of the gas is used to realize pressure maintaining and feeding. The principle of gas-assisted injection molding. The principle of gas-assisted injection molding is that the gas enters from the inside of the plastic melt. When molding, the accurately measured melt is injected into the mold cavity first, and then the gas is injected into the melt through a special nozzle. The gas diffusion pushes the melt to fill the mold cavity. After mold filling, the pressure of the gas in the melt remains unchanged or rises to maintain pressure and replenish the material. After cooling, the gas in the plastic part can be removed. The pressure forming method of gas on the surface of plastic melt is also called surface gas forming method. This method is a method of injecting high-pressure gas into the special closed part of the bottom surface of the plastic injection molding products in the mold to make the surface of the injection molding products free of shrinkage marks.
ALIBABA's first customer since its launch
In November 2014, we became a member of Alibaba Chengxintong, marking our official entry into the field of e-commerce. Our website is http://zhusumojujiagong.1688.com , and people from all walks of life are welcome to pay attention to our company. As we all know, Alibaba went public in the United States in August. Now e-commerce has become a modern trend, we must adapt to the development of the Times, with the times, in order to open up a scientific line to adapt to the development of our enterprises. We hope that our customers, friends, suppliers, and more support our TYFE MOLD!
Warmly congratulate Guangzhou Taifa Mould Co. , Ltd. . Website officially opened in September 2014! ! !
Business license
Guangzhou Taifa mould welcome new and old customers order to join! !
Introduction of filled modified PP (polypropylene) plastic technology
In November 2014, we became a member of Alibaba Chengxintong, marking our official entry into the field of e-commerce. Our website is http://zhusumojujiagong.1688.com , and people from all walks of life are welcome to pay attention to our company. As we all know, Alibaba went public in the United States in August. Now e-commerce has become a modern trend, we must adapt to the development of the Times, with the times, in order to open up a scientific line to adapt to the development of our enterprises. We hope that our customers, friends, suppliers,
7 factors to be considered in injection molding process
Guangzhou Taifa Mould Co. , Ltd. has officially become a member of alibaba integrity
Powered by www.300.cn | SEO Business license
